Mounting materials


Rubber and silicone dampers

TypeDescriptionStateBrandNumber in stockPrice each (Euro)

Noval ring thin2 mm thick silicone rings for damping tubes. Fits noval tubes like 12AX7/ECC83, E88CC/6DJ8, etcNNP???
Picture
751.90
Noval ring thick5 mm thick silicone rings for damping tubes. Fits noval tubes like 12AX7/ECC83, E88CC/6DJ8, etcNNP???
Picture
752.50
Noval ring thick5 mm thick silicone rings for damping tubes. Fits tubes like the thinner EL34 (Sovtek, and later NOS RFT EL34) and straight version 6V6GT, etcNNP???
Picture
752.90
Noval ring thick5 mm thick silicone rings for damping tubes. Fits shouldered tube like KT66 and KT88 and alikesNNP???
Picture
753.90
Noval ring thick5 mm thick silicone rings for damping tubes. 35 mm inner diameter, fits tubes with 37-40 mm diameterNNP???
Picture
753.50
Noval ring thick5 mm thick silicone rings for damping tubes. 45 mm inner diameter, fits tubes with 47-56 mm diameterNNP???
Picture
753.90

8x8, M38 mm heigh, 8 mm diameter. M3x6 mounting, male/female fully isolated rubber dampers, max 4 kg. Very suitable for mounting PCB's. Also works great as tube damper, mounting tube sockets with these to the chassis works the same as much more expensive available commercial dampersNNP???
Picture
751.90
10x10, M410 mm heigh, 10 mm diameter. M4x10 mounting, male/female fully isolated rubber dampers, max 5 kg. very suitable for mounting tranformersNNP???
Picture
952.20
16x15, M515 mm heigh, 16 mm diameter. M5x12 mounting, male/female fully isolated rubber dampers, max 20 kgNNP???
Picture
82.90
16x15, M515 mm heigh, 16 mm diameter. M5x12 mounting, male/male fully isolated rubber dampers, max 20 kgNNP???
Picture (alike)
82.90
DampersOther sizes and threat availabe, also female/female and male/male, please askNNP???

Stand offs

TypeDescriptionStateBrandNumber in stockPrice each (Euro)

2 pin standoff SO21Pertinax, 2 connections, 1 isolated other connected to groundNOS???
picture (alike)
120.70
3 pin standoff SO31Pertinax, 3 connections, 2 isolated, middle connected to groundNOS???
picture
900.80
3 pin standoff SO32Pertinax, 3 isolated connectionsNOS???
picture
901.00
3 pin standoff SO33Pertinax, 3 connections, 2 isolated, outer one connected to ground, small versionNOS???
picture (alike)
100.90
4 pin standoff SO41Pertinax, 4 isolated connections, pertinax clamped in metal frame for mountingNOS???
picture
341.60
4 pin standoff SO42Pertinax, 4 isolated connections, extra mounting tag in middleNOS???
picture (alike)
101.60
5 pin standoff SO51Pertinax, 5 isolated connectionsNOS???
picture
901.95
6 pin standoff SO61Bakelite standoff, 6 isolated double pins. Can be mounted vertically and horizontallyNOS???
picture
20000.95
7.50 for 10 pcs
6 pin standoff SO62Pertinax, 6 isolated connections, extra mounting tag in middleNOS???
picture (alike)
32.20
8 pin standoff SO81Ceramic standoff, 8 isolated silver plated pins, and one in center for ground connected to two screws for mounting at the backsideNOS???
picture
201.95
10 pin standoff SO1013 mm thick pertinax, 1/5 of the 50 connections tag board below. Two rows of 5 silver plated brass isolated connections. Size 6.7 x 6.35 cm, center of tags 5.1 cm (2") apartNOS???
picture
53.00
12 pin standoff SO121Ceramic standoff, 12 isolated tags, very high quality like used in Tektronix equipmentNOS???
picture
44.50
26 pin standoff SO2612 mm thick epoxy, 26 isolated connections. Size 30 x 1.3 cmNOS???
picture
404.50
30 pin standoff SO301Pertinax, 30 isolated connections and many holes for mounting parts and tube sockets. Size 14.7 x 5.8 cmNOS???
picture
66.50
50 pin standoff SO5013 mm thick pertinax, 50 silver plated brass isolated connections in two rows. One board is scored in five pieces of 10 tags boards. Size 33.3 x 6.35 cm, center of tags 5.1 cm (2") apartNOS???
picture
109.50
56 pin standoff SO5612.5 mm thick epoxy, 56 isolated connections in two rows. Size 30.0 x 5.5 cm, center of tags 4.0 cm apartNOS???
picture
409.50

Feet, spikes, etc

TypeDescriptionStateBrandNumber in stockPrice each (Euro)

SpikesSpikes for speakers. Very nice and good spikes, easy to mount. Bag of 8 pcs, black colourNNPIntertechniek
picture
413.50 (bag)
Socket for spikesSockets for spikes, avoids scratches on the surface where they are placed. Bag of 8 pcs, black colourNNPIntertechniek
picture
63.50 (bag)
Spike basesSpikes for small speakers and equipment. Very nice and good spikes, self adhesive for very easy mounting. Special slected materials for best damping. 32 mm diameter and 18 mm highNNPSoundcare
picture
386.90 each

Capacitor mounting brackets/clamps

TypeDescriptionStateBrandNumber in stockPrice each (Euro)
Capacitor clampFor paper oil capacitors of 9.0 to about 11.0 cm height, type number CP07SB4, some also a bit longer (11.5 cm), please ask if you need thatNOS???
picture
302.50
Capacitor clampFor paper oil capacitors of 11.5 to about 13.0 cm height, type number CP07SB6-C4NOS???
picture
82.75

Capacitor clamp
CC25V1
For round capacitor of 25 mm diameter, two chassis holes. Vertical mountingNNP???
picture
240.60
Capacitor clamp
CC25H1
For round capacitor of 25 mm diameter, two chassis holes. Horizontal mountingNNP???
picture
100.75
Capacitor clamp
CC30V1
For round capacitor of 30 mm diameter, two chassis holes. Vertical mountingNNP???
picture
140.60
Capacitor clamp
CC30V2
For round capacitor of 30 mm diameter, two chassis holes. Vertical mountingNNP???
picture
350.75
Capacitor clamp
CC30H1
For round capacitor of 30 mm diameter, two chassis holes. Horizontal mountingNNP???
picture
140.75
Capacitor clamp
CC35V1
For round capacitor of 35 mm diameter, two chassis holes. Vertical mountingNNP???
picture
750.65
Capacitor clamp
CC35H1
For round capacitor of 35 mm diameter, two chassis holes. Horizontal mountingNNP???
picture
250.70
Capacitor clamp
CC40V1
For round capacitor of 40 mm diameter, two chassis holes. Vertical mountingNNP???
picture
40.75
Capacitor clamp
CC40V2
For round capacitor of 40 mm diameter, two chassis holes. Vertical mountingNNP???
picture
201.05
Capacitor clamp
CC40H1
For round capacitor of 40 mm diameter, two chassis holes. Horizontal mountingNNP???
picture
100.90
Capacitor clamp
CC45V1
For round capacitor of 45 mm diameter, two chassis holes. Vertical mountingNNP???
picture
350.75
Capacitor clamp
CC45H1
For round capacitor of 45 mm diameter, two chassis holes. Horizontal mountingNNP???
picture
201.00
Capacitor clamp
CC50V2
For round capacitor of 50 mm diameter, three chassis holes. Vertical mountingNNP???
picture
352.50
Capacitor clamp
CC51V1
For round capacitor of 51 mm diameter, two chassis holes. Vertical mountingNNP???
picture
102.95
Capacitor clamp
CC64V1
For round capacitor of 64 mm diameter, two chassis holes. Vertical mountingNNP???
picture
102.10
Capacitor clamp
CC65V1
For round capacitor of 65 mm diameter, three chassis holes. Vertical mountingNNP???
picture
103.35
Capacitor clamp
CC76V1
For round capacitor of 76 mm diameter, three chassis holes. Vertical mountingNNP???
picture
104.45

Resistor clampFor clamp mounted resistors of 2.5 cm (1") diameterNOS???
picture
502.50 for 5 pcs
Resistor clampFor clamp mounted resistors of 2.5 cm (1") diameter, heavy silver plated versionNOS???
picture
506.50 for 5 pcs

Other mounting

TypeDescriptionStateBrandNumber in stockPrice each (Euro)

Circuit boardDouble sided 1.5 mm thick epoxy circuit board, little corrosion near the edges, but easy to make shiny again. Measures 37 x 46 cm (15" x 18") or 34 x 55 cm. Very nice for building your tube amp projects, when all parts are attached on this board, you can mount it under a chassis, with the tubes through holes in the chassis, to have a screwless top cover! Also very good for shielding certain parts of the circuit from others.NOS???
picture
picture
30010.00